Wilma Cargo
|
B4 PARTS NEEDED!!Can anyone help?
I have attempted to track down all of my Associated B4 parts that have been scattered through the house / garage / driveway etc, but have a few essential items awol. Can anyone lend or sell me the following (for Sunday  ):
diff screw cap - thrust race end
Plastic gear cover
Rear silver springs
30 degree front c hubs
front wheels
I have also looked at the tyres that i ordered in and they have sent me 4WD yellow fronts instead of 2WD yellow fronts - does anyone have some to swop? They are unused.
Any help with any of the above would be well appreciated,
Ryk
|
Matt
|
I can help with the
Gear cover
silver prings
|
BenH
|
Re: B4 PARTS NEEDED!! | Wilma Cargo wrote: | Can anyone help?
I have attempted to track down all of my Associated B4 parts that have been scattered through the house / garage / driveway etc, but have a few essential items awol. Can anyone lend or sell me the following (for Sunday ):
diff screw cap - thrust race end
Plastic gear cover
Rear silver springs
30 degree front c hubs
front wheels
I have also looked at the tyres that i ordered in and they have sent me 4WD yellow fronts instead of 2WD yellow fronts - does anyone have some to swop? They are unused.
Any help with any of the above would be well appreciated,
Ryk |
I have all of the above - this may sound strange, but I don't know what the diff screw cap thrust race end is. If you put up a pic I'll dig it out. I have a pretty-much-new B4 in bits and a tonne of brand new still in packet spares.
I have located
a spare NIP gear cover.
NIP 30D Castor Blocks
I also have two front tyres (schumies) on wheels. These look nearly new, but I couldn't tell you whether they are yellow, greens or blue.
NIP full set of springs.
I'll bring these along Sunday and the B4 peices with spares. If you need anything before then please drop me a PM.
|
Juddy
|
I'll should have most of them bits to, see ya Sunday mate!
|
Wilma Cargo
|
Thanks Matt, Juddy & Ben.
The dust cap is the light coloured plastic cap that fits inside the diff outdrive over the top of the diff screw head. If you have it Ben, that would be great, if not the diff still works, it will just get a bit gritty through the day. At least i'll have an excuse when i get beaten on Sunday!
Thanks again, Ryk
|
|
|
|